---
title: "Growing Degree Days [1.0]"
description: "The development of plants depends on the accumulation of heat. Accumulated growing degree days (GDDs) can be used to predict when a crop will reach a particular growth stage."
url: "https://docs.zentracloud.io/l/en/article/wjikglvh4l-growing-degree-days"
category: "Models"
updated_at: "2026-06-23T17:51:03Z"
language: "en"
---

# Growing Degree Days [1.0]

The development of plants depends on the accumulation of heat. Accumulated Growing Degree Days (GDDs) can be used to predict when a crop will reach a particular growth stage.

Two methods are presented by [McMaster and Wilhelm (1997)](https://www.sciencedirect.com/science/article/pii/S0168192397000270). Method 2 is used in the ZENTRA Cloud environmental model for GDD. 

Method 2 implements a value check against the maximum (Tx) and minimum (Tn) temperatures before calculating Tavg.

 

Formula: Tavg = (Tx* + Tn\*) / 2

Tx* and Tn* are the adjusted maximum and minimum temperatures.

- If Tx is greater than the upper temperature limit then Tx* is set to equal the upper temperature limit.
- If Tx is smaller than the base temperature then Tx* is set to equal the base temperature.
- If Tn is greater than the upper temperature limit then Tn* is set to equal the upper temperature limit.
- If Tn is smaller than the base temperature then Tn* is set to equal the base temperature.

* * *

#### METER Sensors that support GDD:

- [ATMOS 41](https://www.metergroup.com/environment/products/atmos-41-weather-station/)
- [ATMOS 41W](https://www.metergroup.com/en/meter-environment/products/atmos-41w-wireless-remote-weather-station)
- [ATMOS 14](https://www.metergroup.com/environment/products/atmos-14/)/VP-4/VP3
- [ECT](https://www.metergroup.com/environment/products/ect/)

* * *

#### GDD

- Click the **environmental model** icon.
- Select **Growing Degree Days**.
- Enter a name for the model and a name for the chart.
- Enter values for the **Maximum** and **Minimum**(i.e. Base) temperature.
- A default air temperature measurement will be selected. Select a different measurement if desired.
- Optional: Enter the target GDD.
- Click **Create**.

![](https://files.helpdocs.io/la7ra8dc1e/articles/wjikglvh4l/1641425334052/create-gdd-final.gif)

* * *

#### Accumulated GDD

- Click the **Vertical Ellipse** icon.
- Select Stats.
- Toggle the desired measurements.
- Click **Accept**.

![](https://files.helpdocs.io/la7ra8dc1e/articles/wjikglvh4l/1641425353365/gdd-stats-final.gif)
