---
title: "Daily Light Integral"
description: "How to create a daily light integral data stream."
url: "https://docs.zentracloud.io/l/en/article/vpykubbq9b-daily-light-integral-2-0"
category: "Environmental Models"
updated_at: "2026-07-10T17:44:50Z"
language: "en"
---

# Daily Light Integral

The Daily Light Integral (DLI) is the total number of photosynthetically active photons that reach a 1 m² surface over a 24-hour period. It's a useful way to think about the total amount of radiation available for plant growth in a given day. Photosynthetic photon flux density (PPFD) is measured by the QSO-S PAR Photon Flux sensor in units of μmol m⁻² s⁻¹, and this instantaneous value is averaged over the measurement interval by the data logger.

- DLI (μmol m⁻²) = ∑ (total mols per square meter in a 24-hour period)
- DLI is typically reported in mols m⁻²: DLI (mols m⁻²) = DLI (μmol m⁻²) / 1,000,000

The Daily Light Integral model uses measured PAR (Photosynthetically Active Radiation) to calculate an accumulated daily light integral. The time period resets daily at midnight.

#### Supported sensors

The Daily Light Integral can be calculated from any photon flux light sensor.

**Recommended sensors**

- PAR SQ521

##### Create a Daily Light Integral model

1. On the **Data** page, select **New Data**.
2. Select **Daily Light Integral** as the type.
3. Select one or more photon flux light sources.
4. Edit the data stream color.
5. Edit the data stream name.
6. Select **Create** to finish.

The new data stream(s) will now appear in your data list.

![](https://files.helpdocs.io/la7ra8dc1e/articles/vpykubbq9b/1742587330571/daily-light-integral.png)

![](https://files.helpdocs.io/la7ra8dc1e/articles/vpykubbq9b/1747341667068/daily-light-integral.png)

##### How-To-Video

[Embedded iframe](//fast.wistia.net/embed/iframe/vh5hyk59l2)
