---
title: "Explorer: Targets"
description: "Create RANGE, THRESHOLD, SUM, and DELTA targets to compare chart data against goals or limits, manage them across charts, and use them to trigger alerts."
url: "https://docs.zentracloud.io/l/en/article/t7aw9398nv-targets"
category: "Explorer & Dashboards"
updated_at: "2026-11-03T22:00:45Z"
language: "en"
---

# Explorer: Targets

Show your data against a goal or limit, and use targets to trigger alerts.

A target belongs to one measurement, such as soil water content or air temperature. Once created, it can be added to any chart in the [Explorer](https://docs.zentracloud.io/l/en/article/g35akfsqr4-explorer) that has data for that measurement. Creating and editing targets needs the Editor role or higher.

[Add a target to a graph | ZENTRA Cloud](https://www.youtube.com/embed/KTg3CKhRTVk?feature=oembed)

##### 1. Target types

- **RANGE** — a low and a high value, such as an ideal soil moisture band. Drawn as a shaded band.
- **THRESHOLD** — a single value, such as a frost temperature. Drawn as a line.
- **SUM** — the total over a time window exceeds a value, such as more than 25 mm of rain within 24 hours.
- **DELTA** — the change over a time window exceeds a value, such as air temperature moving more than 5 °C within 1 hour.

**SUM** and **DELTA** targets are designed for [alerts](https://docs.zentracloud.io/l/en/article/gmrgrv31z1-alerts). Once one has an alert, the chart shades the periods when the alert was active. Without an alert, they don't appear on the chart.

##### 2. Create a target

1. Open a chart in the Explorer.
2. Select **Target**, then **Add New**.
3. Choose the **Measurement**.
4. Enter a **Target Name**, and (optional) choose a color.
5. Choose the type: **RANGE**, **THRESHOLD**, **SUM**, or **DELTA**.
6. Enter the values:
   
   - **RANGE** — the low value, **to**, the high value.
   - **THRESHOLD** — one value.
   - **SUM** or **DELTA** — after **exceeds**, enter the value. Then choose **within** and set the time window, from 1 to 60 **minutes**, **hours**, or **days**.
7. Select **Save**. A **Target saved successfully!** message confirms it.

If the chart already has data for that measurement, the new target is added to it. Save the chart to keep the target on it.

##### 3. Add an existing target to a chart

1. Select **Target**.
2. Search with **Search targets**, or browse the list. Each target shows its measurement and values.
3. Select the target.
4. Save the chart.

A target can only be added to a chart with data for its measurement. If none is there, you'll see a message asking you to add matching data first.

##### 4. Edit a target

1. Select the **⋮** menu on the target below the chart and choose **Edit**, or select **Target** and then the **Pencil** next to the target.
2. Make your changes in **Edit Target**.
3. Select **Save**.

Your changes apply to every chart that uses the target.

##### 5. Remove a target from a chart

1. Select the **⋮** menu on the target and choose **Remove**.
2. If the target has an alert, confirm with **Yes, Remove**. Removing the target from the chart also deletes its alert.
3. Save the chart.

The target itself isn't deleted and can be added back later.

##### 6. Delete a target

1. Open **Edit Target** (see Edit a target).
2. Select the trash icon.
3. Select **Yes, Delete**.

Deleting a target removes it from every chart and deletes every alert on it.

##### 7. Alert on a target

[Get alerted when data leaves a target | ZENTRA Cloud](https://www.youtube.com/embed/pDYGIu5-V0M?feature=oembed)

Save the chart with its target first. Then select the bell on the target, or select its **⋮** menu and choose **Alert**. See [Alerts](https://docs.zentracloud.io/l/en/article/gmrgrv31z1-alerts).
