---
title: "Groundwater Depth"
description: "How to create a groundwater depth data stream."
url: "https://docs.zentracloud.io/l/en/article/rbdujfuohp-groundwater-depth-2-0"
category: "Environmental Models"
updated_at: "2026-07-10T18:22:17Z"
language: "en"
---

# Groundwater Depth

Calculate the true water level with a reference offset. Typically used for depth-to-groundwater calculations in civil and geotechnical applications, groundwater depth is a basic offset for water level data: it calculates the depth to groundwater by subtracting the sensor-measured depth from the installation depth.

**Groundwater Depth = Install Depth − Head**

- **Install Depth** is the sensor installation depth from a point of reference, typically a wellhead.
- **Head** is the sensor-measured water level.

##### Supported sensors

Groundwater depth can be calculated from any water level measurement.

**Recommended sensors**

- HYDROS 21
- CTD
- CTD-5
- CTD-10

##### Create a Groundwater Depth model

1. On the **Data** page, click **New Data**.
2. Select **Groundwater** as the type.
3. Select one or more water level sources.
4. Edit the data stream color.
5. Edit the data stream name.
6. The sensor **Position** is the default value for the install depth/offset. Edit the **Height/Depth**, or enter a value if none is present.
7. Select **Create** to finish.

The new data stream(s) will now appear in your data list.

*Groundwater depth*

![](https://files.helpdocs.io/la7ra8dc1e/articles/rbdujfuohp/1742590335286/groundwater-depth.png)

*Groundwater variants*

![](https://files.helpdocs.io/la7ra8dc1e/articles/rbdujfuohp/1742590625458/ground-water-variants.png)

##### How-To-Video

[Embedded iframe](//fast.wistia.net/embed/iframe/nyfzjfudz5)
