---
title: "Configure a Data Logger"
description: "Remotely configure a ZL6 or ATMOS 41W: deployment status, name, logging interval, upload schedule, port sensors and calibrations, location, and time zone, including switching devices from ZENTRA Cloud 1.0."
url: "https://docs.zentracloud.io/l/en/article/o8edwa70bg-configure-data-logger"
category: "Data Loggers"
updated_at: "2026-11-03T22:30:16Z"
language: "en"
---

# Configure a Data Logger

Remotely configure your ZL6 or ATMOS 41W: its status, name, logging and upload schedule, ports, location, and time zone.

[Configure a data logger | ZENTRA Cloud](https://www.youtube.com/embed/j74XbIwZSew?feature=oembed)

Changes you save are sent to the logger the next time it connects to upload data. Until then, the window shows that a change is waiting. Configuring a device needs the Editor role or higher; other roles can open the window to view settings.

##### 1. Devices that are also in ZENTRA Cloud 1.0

A device that isn't in ZENTRA Cloud 1.0 can be configured from ZENTRA Cloud 2.0 as soon as you add it.

A device that's already in 1.0 keeps taking its settings from 1.0 until you switch it. Until you do, its name, logging interval, upload settings, and port sensors and positions are locked, with the message **This device can only be edited from www.zentracloud.com**. You can still change **Pause Notifications**, **Deployment Status**, **Organization**, **Folder**, **Geolocation**, and port **Calibration**.

To switch a device to ZENTRA Cloud 2.0:

1. Open the device's configuration (see Open a device's configuration).
2. In the box that reads **This device is currently receiving configuration changes from:**, select **ZENTRA Cloud 2.0 (enable for this device)**.
3. Select **Update**.
4. In **Switch Device**, select **Confirm**. You don't need to select **Save**.

The switch can't be cancelled or reversed. It completes the next time the device uploads data. Don't change the device's settings in 1.0 while the switch is waiting. See [Transitioning from ZENTRA Cloud 1.0 to 2.0](https://docs.zentracloud.io/l/en/article/2ric6r6iso-transitioning-from-zentra-cloud-1-0-to-2-0).

##### 2. Open a device's configuration

1. In the navigation menu, select **Devices**.
2. Select the **⋮** menu for the device and choose **Configuration**, or select the device name and then **Configuration**.

The window opens as **Edit (serial number) / (device name)**. The top of the window holds the device's status and identity; **Logging & Upload**, **Ports**, and **Geolocation** open below it, one at a time. The options available vary by logger model.

##### 3. Status and identity

- **Pause Notifications** — turns off alerts for this device, for example while you service it.
- **Deployment Status** — the device's overall status:
  
  - **Inventory** — not installed.
  - **Pre-Deploy** — collecting test data before installation.
  - **Deployed** — installed and collecting data.
  - **Maintenance** — being serviced.
  - **Repair** — returned for service.
  - **Archived** — retired, obsolete, or destroyed. Archiving moves the device to your organization's [Archive](https://docs.zentracloud.io/l/en/article/cpvgwp86xh-data-logger-archive).
- **Organization** — moves the device to another organization. You must be an Admin of the current organization and an Admin or Editor of the receiving one. Select **Create New** to move it to a new organization.
- **Device Name** — the name shown throughout ZENTRA Cloud, under 18 characters.
- **Folder** — the folder the device is filed in. Select **Create New** to add a folder.

##### 4. Logging & Upload

Select **Logging & Upload** to open it.

- **Logging Interval** — how often the logger measures: **Off**, 5, 10, 15, 20, 30, 60, or 90 minutes, or 2, 4, 6, or 12 hours.
- **Upload Frequency** — how often a cellular logger sends data during each upload hour: **Off**, **1 per hour**, or **4 per hour**. **4 per hour** requires the High Data plan. Choosing **Off** stops the logger from uploading.
- **Daily Uploads** — select hours on the **AM** and **PM** clock faces to choose when the logger uploads. The heading shows the total uploads per day. The clock is locked while **Upload Frequency** is **Off**.

##### 5. Ports

Select **Ports** to open it. Each port has:

- **Sensor** — the sensor connected to that port.
- **Position** — choose **Height** or **Depth**, then enter the value. Some sensors have a fixed position.
- **Calibration** — the soil calibration for soil moisture sensors. Select **Create New** to add a custom calibration; see [Soil-Specific Calibrations](https://docs.zentracloud.io/l/en/article/o3inxr2y30-soil-specific-calibrations).

Battery and barometer ports aren't listed. Port settings can't be changed on an ATMOS 41W.

##### 6. Geolocation

Select **Geolocation** to open it. By default, ZENTRA Cloud uses the location reported by the logger's GPS.

To set a fixed location:

1. Turn on **Location override**.
2. Enter the **Latitude**, **Longitude**, and **Device Elevation**.
3. (Optional) Select the map icon to place the device visually. Search with **Search for location**, use your current location, or drag the map, then select **Save Location**.

To show this device's data in a different time zone from your organization, turn on **Time zone override** and choose a **Timezone**.

##### 7. Save and confirm changes

1. Select **Save**. A **Device edited successfully!** message confirms the change was saved.
2. Until the logger next connects, the window shows **A configuration change is awaiting confirmation from the device.** Select **Show** to list each pending change with its old and new value. Fields with a pending change show an hourglass.

**Save** isn't available while **Device Name** is empty, or while an override is on with its values blank.
