---
title: "Soil-Specific Calibrations"
description: "How to enter and apply soil-specific calibrations."
url: "https://docs.zentracloud.io/l/en/article/o3inxr2y30-soil-specific-calibrations"
category: "Data"
updated_at: "2026-11-03T22:35:51Z"
language: "en"
---

# Soil-Specific Calibrations

Generic soil calibrations provide reasonable accuracy for most mineral soils. For additional accuracy, create and apply soil-specific calibrations. You can enter and apply them from the [Device Configuration](/l/en/article/o8edwa70bg-configure-data-logger) or from the [Data table](/l/en/article/xr7817ns0v-edit-data).

[Apply a soil-specific calibration | ZENTRA Cloud](https://www.youtube.com/embed/zWh5VMDr3u4?feature=oembed)

For guidance on [how to calibrate soil moisture sensors](https://www.metergroup.com/environment/articles/how-calibrate-soil-moisture-sensors/), or to learn about the METER calibration service, contact Customer Support.

#### Apply a calibration from Ports

In the **Ports** section of the Device Configuration for soil water content sensors, select an existing calibration or enter a new calibration for that sensor model.

Soil-specific calibrations are unique to each sensor model. Sensor models that share the same calibration are:

- 5TE and 5TM
- TEROS 11 and TEROS 12

![](https://files.helpdocs.io/la7ra8dc1e/articles/o3inxr2y30/1730996211193/calibratio.png)

##### Edit an individual calibration

Select the **Pencil** icon to edit the calibration for soil moisture measurements, or select **Edit** from the **Ellipsis** menu.

![](https://files.helpdocs.io/la7ra8dc1e/articles/o3inxr2y30/1730996958221/data-edit-cal.png)

##### Edit in bulk

On the **Data** page, use the checkboxes to multi-select, then choose **Soil Calibration** from the toolbar to make bulk edits.

![](https://files.helpdocs.io/la7ra8dc1e/articles/o3inxr2y30/1730997102967/bulk-edit-cal.png)

#### Enter calibration coefficients

Enter a name for the calibration. Coefficients can be entered in scientific notation or full decimal form — for example, `1.0e-3` or `0.001`.

![](https://files.helpdocs.io/la7ra8dc1e/articles/o3inxr2y30/1730997704574/calibration-enter-coeff.png)
