---
title: "Daily Light Photoperiod"
description: "How to create a daily light photoperiod data stream."
url: "https://docs.zentracloud.io/l/en/article/j37h090fde-daily-light-photoperiod-2-0"
category: "Environmental Models"
updated_at: "2026-07-10T17:46:42Z"
language: "en"
---

# Daily Light Photoperiod

Daily Light Photoperiod uses measured PAR (Photosynthetically Active Radiation) or PYR (Solar Radiation) to calculate an accumulated daily photoperiod, resetting daily at midnight. Photoperiod is the total amount of time (in hours) over a 24-hour period that an organism receives light. It can be calculated from either a QSO-S PAR Photon Flux sensor or a pyranometer solar radiation sensor.

Quantum and pyranometer sensors can report non-zero PPFD or solar radiation values even when no light is present. A non-zero threshold is used to filter these values out of the total photoperiod: **&gt; 5 μmol m⁻² s⁻¹** for PPFD from the QSO-S quantum sensor, and **&gt; 2 W m⁻²** solar radiation from the pyranometer sensor.

##### Supported sensors

Daily Light Photoperiod can be calculated from any light sensor.

**Recommended sensors**

- ATMOS 41 (photon flux density)
- ATMOS 41W
- PAR SQ-521
- PYR SP-110 Pyranometer

##### Create a Daily Light Photoperiod model

1. On the **Data** page, select **New Data**.
2. Select **Daily Light Photoperiod** as the type.
3. Select one or more light sources.
4. Edit the data stream color.
5. Edit the data stream name.
6. Select **Create** to finish.

The new data stream(s) will now appear in your data list.

![](https://files.helpdocs.io/la7ra8dc1e/articles/j37h090fde/1747341751103/daily-light-photoperiod.png)

##### How-To-Video

[Embedded iframe](//fast.wistia.net/embed/iframe/vh5hyk59l2)
