---
title: "Wind Chill"
description: "How to create a wind chill data stream."
url: "https://docs.zentracloud.io/l/en/article/h1lwnnki30-wind-chill-2-0"
category: "Environmental Models"
updated_at: "2026-07-10T19:34:58Z"
language: "en"
---

# Wind Chill

Wind Chill is a measure of how cold it feels to the human body when wind is factored in with the actual air temperature. It is based on the rate of heat loss from exposed skin caused by the combined effects of wind and cold. The wind chill temperature is always lower than the air temperature wherever wind chill applies. Wind speeds under 5 mph have a negligible effect; speeds between 5 and 50 mph have the greatest effect; and above 50 mph the change in wind chill is minimal.

**Wind Chill (°C) = 13.12 + 0.6215T − 11.37(V^0.16) + 0.3965T(V^0.16)**

- T = temperature in degrees Celsius (°C)
- V = wind velocity in kilometers per hour (km/h)

(Source: [NOAA](https://www.noaa.gov/jetstream/synoptic/wind-chill))

Wind chill is defined for temperatures below 10 °C (50 °F) and wind speeds above 4.8 km/h (3.0 mph).

#### Supported sensors

Wind chill can be calculated from any METER all-in-one weather station.

**Recommended sensors**

- ATMOS 41
- ATMOS 41W

#### Create a Wind Chill model

1. On the **Data** page, select **New Data**.
2. Select **Wind Chill** as the type.
3. Select one or more ATMOS 41 sources.
4. Edit the data stream color.
5. Edit the data stream name.
6. Select **Create** to finish.

The new data stream(s) will now appear in your data list.

*Wind chill*

![](https://files.helpdocs.io/la7ra8dc1e/articles/h1lwnnki30/1742593188347/wind-chill.png)

![](https://files.helpdocs.io/la7ra8dc1e/articles/h1lwnnki30/1747341934117/wind-chill.png)

##### How-To-Video

[Embedded iframe](//fast.wistia.net/embed/iframe/lja55s9yp6)
