---
title: "Alerts"
description: "Alerts help you monitor your devices and data. You can create alerts to track environmental measurements and device battery, then set up Notification Groups to receive email notifications when parameters are exceeded."
url: "https://docs.zentracloud.io/l/en/article/gmrgrv31z1-alerts"
category: "Alerts"
updated_at: "2026-11-03T22:28:27Z"
language: "en"
---

# Alerts

Alerts help you monitor your devices and data, and notify your team by email and SMS.

There are two kinds of alerts. **Device** alerts warn you when a device's battery runs low. **Chart** alerts warn you when data on a chart moves past a [target](https://docs.zentracloud.io/l/en/article/t7aw9398nv-targets). Each alert notifies the **notification groups** you attach to it. Creating and editing alerts needs the Editor role or higher.

##### 1. How notifications work

Notifications are sent only when an alert changes state:

- **Triggered** — sent when the alert condition is first met.
- **Resolved** — sent when the condition clears.

This applies to email and SMS alike. Alerts don't send reminders while they stay active. You'll receive more notifications only if the alert keeps switching between triggered and resolved, for example when readings hover around the threshold.

Each device or data stream on an alert is tracked separately. If you're in more than one group on the same alert, you still get one notification per device or data stream on each channel.

A device without an active subscription doesn't trigger alerts. See [When a subscription ends](https://docs.zentracloud.io/l/en/article/jsaph3zgn1-what-happens-when-a-subscription-ends).

##### 2. View your alerts

In the navigation menu, select **Alerts**. The page lists every alert in the organization, with its **Type**, **Status**, and notification **Group**.

- **Status** shows **Enabled** or **Disabled**, plus **Ongoing** while the alert is active.
- A **No Devices** or **No Streams** warning means the alert has nothing to watch and won't trigger.
- Under each alert name, you'll see **Alert has never triggered.** or when it last triggered.

Every organization starts with a **System Device Alert**, which watches all of the organization's devices for a battery below 10%. It has no notification groups at first, so add one to receive its notifications.

##### 3. Create a device alert

[Set up a device alert | ZENTRA Cloud](https://www.youtube.com/embed/_Hfb3Ng_A_A?feature=oembed)

A device alert notifies you when a device's battery drops below the level you choose, and again when it recovers.

1. Select **Create Alert**, then **Device**.
2. Enter an **Alert Name**.
3. Under **Monitor these devices**, select the devices to watch, or select **Select All**.
4. Set **Alert when battery level drops below:**. The default is 50%.
5. Under **Notification groups**, select **Add Group** and choose a group, or select **Create Group** (see [Create and manage notification groups](https://1354c76baf52555fa6903992e0d438a0.claudemcpcontent.com/mcp_apps?stable-origin=true&connect-src=https%3A%2F%2Fesm.sh%20https%3A%2F%2Fcdnjs.cloudflare.com%20https%3A%2F%2Fcdn.jsdelivr.net%20https%3A%2F%2Funpkg.com&resource-src=https%3A%2F%2Fesm.sh%20https%3A%2F%2Fcdnjs.cloudflare.com%20https%3A%2F%2Fcdn.jsdelivr.net%20https%3A%2F%2Funpkg.com%20https%3A%2F%2Ffonts.googleapis.com%20https%3A%2F%2Ffonts.gstatic.com%20https%3A%2F%2Fassets.claude.ai#s7)).
6. Select **Save**.

##### 4. Create a chart alert

A chart alert notifies you when data on a saved chart moves past a target.

1. Select **Create Alert**, then **Chart**.
2. Under **Chart**, select one or more charts.
3. Under **Target**, choose a target, or select **Add New** to create one.
4. Under **Alert**, choose the data streams to watch.
5. Set **When value**:
   
   1. For a **RANGE** target: **is above**, **is below**, or **is outside**.
   2. For a **THRESHOLD** or **SUM** target: **is above** or **is below**.
   3. A **DELTA** target alerts when the change exceeds its value, so there's no **When value** to set.
6. (Optional) Enter an **Additional message when high** or **Additional message when low**. Check the wording under **Message preview**.
7. Under **Notification groups**, add one or more groups.
8. Select **Save**. The target is added to each chart you selected.

Additional messages are included in email notifications, not in SMS.

##### 5. Create an alert from a target

[Get alerted when data leaves a target | ZENTRA Cloud](https://www.youtube.com/embed/pDYGIu5-V0M?feature=oembed)

You can also create an alert directly from a target on a chart in the [Explorer](https://docs.zentracloud.io/l/en/article/g35akfsqr4-explorer). Save the chart with its target first.

1. Open the chart in the Explorer.
2. On the target, select the bell, or select the **⋮** menu and choose **Alert**.
3. Under **Alert**, choose the data streams to watch, and set **When value**.
4. (Optional) Enter an additional message for high or low values.
5. Under **Notification groups**, add one or more groups.
6. Select **Create**.

##### 6. Turn off or delete an alert

To pause an alert without deleting it:

1. Open the alert for editing: on the **Alerts** page, select the alert's **⋮** menu and choose **Edit**, or select **Alert** from its target's menu in the Explorer.
2. Turn off the switch next to the alert name.
3. Select **Save**. The alert's status shows **Disabled**.

To delete an alert, select its **⋮** menu on the **Alerts** page, choose **Delete**, then select **Yes, Delete**. You can also select **Delete Alert** while editing it. Deleting a target also deletes every alert on it.

##### 7. Create and manage notification groups

Notification groups decide who receives an alert and how.

Create a group

1. While creating or editing an alert, select **Create Group**.
2. Enter a **Group Name**, and (optional) choose a color.
3. Under **Select members**, choose the members to add. Members who haven't accepted their invitation yet can't be added.
4. For each member, select **Email**, **SMS**, or both. New members start with **Email** selected.
5. Select **Create**.

Manage groups on an alert

- In an alert's edit window, select the **⋮** menu on a group and choose **Manage** to change its members, or **Remove** to take it off the alert.
- On the **Alerts** page, select the icon in an alert's **Group** column to open **Manage Subscribers**. Turn each group's bell on or off for that alert, then select **Save**. Select the **Pencil** to edit a group.
- To delete a group, open it and select the trash icon.

##### 8. Receive SMS notifications

To receive alerts by text message, add and verify your mobile number:

1. Select your username in the upper right, then **Profile**.
2. Select **Edit Profile**, then **Add Number**.
3. Enter your **Phone Number** and select **Send Code**.
4. Enter the **Verification Code** from the text message.
5. Agree to receive SMS notifications, then select **Confirm**. A **Phone verified!** message confirms it.

The **SMS** option in a notification group is available only for members with a verified number. Each text names your organization, the alert, whether it triggered or resolved, the reading, and the device. Standard message and data rates may apply.

To stop receiving texts, reply **STOP** to any ZENTRA Cloud text. Reply **START** to receive them again.

##### 9. Review alert history

Select an alert on the **Alerts** page to open its history:

- **Alert Events** charts how many events each device or data stream had over the selected period. The default is **Last 7 Days**.
- The activity table lists each **Issue**, its **Status** (**Ongoing** or **Resolved**), the number of **Events**, and when it **Last Triggered**. Select an issue to see each event.

If the alert has never triggered, the page shows **No alert activity**.
