---
title: "Edit Device"
description: "Manage device the name, measurement interval, communication settings, port settings, GPS location and other parameters on the device configuration page."
url: "https://docs.zentracloud.io/l/en/article/ar910fjj03-edit-a-device"
category: "Devices"
updated_at: "2024-11-01T18:29:03Z"
language: "en"
---

# Edit Device

The Device Configuration page has five tabs:

1. **Device Identity**
2. **Measurement Configuration**
3. **Communication Settings**
4. **GPS Location**
5. **Device Logs**

* * *

#### DEVICE IDENTITY.

Click the **Edit Device Identity** button to edit the **Device Hierarchy**, and or **Device Name**. Other fields may only be viewable depending on the device.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1592675607965/edit-device-1.png)

* * *

**The table below lists by device type the fields that can be edited on the Device Identity tab.**

|                       |                             |                                 |               |
|-----------------------|-----------------------------|---------------------------------|---------------|
| FEATURE               |                             | DEVICE TYPE                     |               |
|                       | **EM50G**                   | **ZL6 / EM60G** **/ ATMOS 41W** | **ZL6 Basic** |
| **Device Hierarchy**  | View / Edit                 | View / Edit                     | View / Edit   |
| **Device Name**       | View / Edit (with override) | View / Edit                     | View / Edit   |
| **Device Height**     | View / Edit                 | View / Edit                     | View / Edit   |
| **Device State**      | View Only                   | View / Edit                     | View Only     |
| **Device Type**       | View Only                   | View Only                       | View Only     |
| **Serial Number**     | View Only                   | View Only                       | View Only     |
| **Firmware Version**  | View Only                   | View Only                       | View Only     |
| **Battery Chemistry** | View Only                   | View Only                       | View Only     |

* * *

**EM50G Only!** To edit the **Device Name** or **Device Height** you must toggle the **Device name override** to On. This will allow ZENTRA Cloud to override what is reported for **Name** and **Height** by the EM50G.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1592685904174/edit-device-7.png)

* * *

#### MEASUREMENT CONFIGURATION

Click the **Edit Measurement Configuration** button to edit the **Measurement Interval**, **Port Settings**, **Sensor Calibration**, and sensor **Installation Height/Depth**. Some fields may only be viewable depending on the device.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1592675617047/edit-device-2.png)

* * *

**The table below lists by device type the fields that can be edited on the Measurement Configuration tab.**

|                          |             |                 |                   |               |
|--------------------------|-------------|-----------------|-------------------|---------------|
| FEATURE                  |             | DEVICE TYPE     |                   |               |
|                          | **EM50G**   | **ZL6 / EM60G** | **ZL6 Basic**     | **ATMOS 41W** |
| **Measurement Interval** | View Only   | View / Edit     | View Only         | View / Edit   |
| **Power Noise Filter**   | View Only   | View / Edit     | View Only         | View / Edit   |
| **Sensor Type**          | View Only   | View / Edit     | View Only         | N/A           |
| **Calibration Values**   | View / Edit | View / Edit     | With Subscription | N/A           |
| **Height/Depth**         | View / Edit | View / Edit     | With Subscription | View / Edit   |

* * *

#### COMMUNICATION SETTINGS

Click the **Edit Communication Settings** button to edit the device **Upload Times** and **Upload Frequency**. Some fields may only be viewable depending on the device.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1592675624994/edit-device-3.png)

* * *

**The table below lists by device type the fields that can be edited on the Communication Settings tab.**

|                      |           |                                      |               |
|----------------------|-----------|--------------------------------------|---------------|
| FEATURE              |           | DEVICE TYPE                          |               |
|                      | **EM50G** | **ZL6 / EM60G** **/ ATMOS 41W**      | **ZL6 Basic** |
| **Upload Times**     | View Only | View / Edit                          | N/A           |
| **Upload Frequency** | View Only | 15-Minute Data Subscription Required | N/A           |
| **APN**              | View Only | View Only                            | N/A           |
| **Module Type**      | View Only | View Only                            | N/A           |
| **SIM Number**       | View Only | View Only                            | N/A           |

* * *

#### GPS LOCATION

Some devices automatically report their lat and long location and altitude. For devices that do not these values must be manually entered.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1614890787566/timezone-override-1.png)

* * *

**The table below lists by device type the fields that must be manually edited vs. those that are automatically populated.**

|               |           |                                 |               |
|---------------|-----------|---------------------------------|---------------|
| FEATURE       |           | DEVICE TYPE                     |               |
|               | **EM50G** | **ZL6 / EM60G** **/ ATMOS 41W** | **ZL6 Basic** |
| **Latitude**  | Manual    | Auto                            | Manual        |
| **Longitude** | Manual    | Auto                            | Manual        |
| **Altitude**  | Manual    | Auto                            | Manual        |
| **Time zone** | Auto      | Auto                            | Manual        |

* * *

To edit the **Latitude, Longitude,** or **Altitude** toggle the **Device location override** to On. This will allow ZENTRA Cloud to override what is reported for Name and Height by the device.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1614890253690/timezone-override-2.png)

* * *

To edit the **Timezone** toggle the timezone override to on (toggle will turn **blue**) and select or search for the desired timezone from the drop-down menu. Learn more about [OVERRIDE TIMEZONE](/l/en/article/qh3ik1fnlt-timezone).

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1614890523927/timezone-override-3.png)

* * *

#### DEVICE LOGS

The device logs are a record of communication activity and settings changes from the logger. You can filter the list or download a spreadsheet record of these logs.

![](https://files.helpdocs.io/la7ra8dc1e/articles/ar910fjj03/1592675646930/edit-device-5.png)
