---
title: "Daily Light Integral [1.0]"
description: "The daily light integral model uses measured PAR (Photosynthetically Active Radiation) to calculate an accumulated daily light integral."
url: "https://docs.zentracloud.io/l/en/article/0fnw0xwzwh-daily-light-integral"
category: "Models"
updated_at: "2026-06-23T17:50:05Z"
language: "en"
---

# Daily Light Integral [1.0]

The Daily Light Integral model uses measured **PAR** (Photosynthetically Active Radiation) to calculate an accumulated daily light integral. The time period resets daily at midnight.

* * *

##### DLI

Daily Light Integral is the total number of photosynthetically active photons that impinge upon 1 m2 surface area over a 24 hour period.  A good way to think of DLI is the total amount of radiation that is available for plant growth in a given day.

* * *

##### PPFD

The photosynthetic photon flux density (PPFD) is measured by the QSO-S PAR Photon Flux sensor in units of μmol m-2 s-1.  This instantaneous value is averaged over the measurement interval by the data logger.

DLI (μmol m-2) = ∑(total mols per square meter in a 24 hour period)

DLI is typically reported in mols m-2.

DLI mols m-2= DLI ((μmol m-2) / 1,000,000

* * *

##### Compatible Sensors

- [PAR SQ-521](https://www.metergroup.com/en/meter-environment/products/sq-521-ss-full-spectrum-quantum-sensor-par-measurement) Photon Flux Density

* * *

##### New DLI chart

- Click the **Environmental model** icon.
- Select **Daily Light Integral.**
- Enter a name for the model.
- Enter a name for the chart.
- Click **Create** to save the chart.

![](https://files.helpdocs.io/la7ra8dc1e/articles/0fnw0xwzwh/1637019319195/ezgif-com-gif-maker.gif)

ZENTRA Cloud will auto-detect an appropriate PAR measurement for the input. If there are multiple PAR measurements specify the desired input from the **sensor inputs** drop-down.

* * *

![](https://files.helpdocs.io/la7ra8dc1e/articles/0fnw0xwzwh/1637020490396/frame-91.png)

*(Example: Daily light integral).*
